NIP Chapter 172 The Process Has Speeded Up
Chapter 172 The Process Has Speeded Up
Chapter 172 The Process Has Speeded Up
This is a letter!
To be precise, it was a registered letter!
After the group office received the letter, it was sent directly to He Hua's office, because he is the deputy general manager, responsible for all the daily affairs and management of the group.
After seeing this letter, He Hua was happy, and immediately came over happily with him, and put the letter on Lin Feng's desk.
When Lin Feng saw the signature of this letter, and then saw that it was a special envelope for the [-]nd International Machine Tool Exhibition, he immediately became happy.
"Mr. He, this should be an invitation letter mailed to us!"
He Hua said, "I guess it's also an invitation letter, boss, please open it and have a look."
Lin Feng nodded, picked up the letter and tore it open, and inside was indeed a beautifully crafted exhibition invitation letter, and another invitation letter to the exhibition.
Sincerely invite Leihuo Technology Industry Group to participate in the [-]nd International Machine Tool Exhibition
The signature is the preparatory group for the [-]nd International Machine Tool Show.
This thing is so wow!
What made Lin Feng even more happy was that it was actually a Class A booth, numbered A-16.
Once, he dreamed of obtaining the qualification to participate in this International Machine Tool Exhibition. For this reason, Lin Feng went to the capital to lobby in person.
Now, dreams come true!
The invitation letter has been mailed, and the other party sincerely invites Leihuo Technology Industrial Group to participate in this International Machine Tool Exhibition!
"Old He, take a look too, and be happy too!"
He Hua happily picked up the invitation letter and looked at it, then picked up the invitation letter and looked at it again, the joy on his face was even stronger, "Boss, we are completely relieved now, this time we must participate in the exhibition well , to push our CNC broaching machine to the international market.”
"Yes, I still expect it to make money. The construction of our factory area still needs a lot of funds. It would be great if we can win a few orders at this International Machine Tool Show."
"It will." He Hua is full of confidence. "Boss, I am personally handling all the preparations for the exhibition. The CNC broaching machine for the exhibition is about to be assembled. It will be shipped to the capital in a few days."
Manufacturing site.
The workers are busy. In the huge workshop, more than half of the area is used for the assembly of machine tools, and part of the area is placed on pallets and shelves, on which are the parts needed for CNC broaching machines.
There were some ordinary lathes, milling machines, etc., but they were all moved away, and they were in a factory building next door.
The Phoenix Factory is so big that there is no shortage of factory buildings. The old factory building next door has been vacant for many years. Lin Feng rented him here for rough processing of rough parts.
The workshop area is not large, just over 1000 square meters, but it is enough as a rough processing workshop.
At the manufacturing site, there are a total of two CNC broaching machines, one of which seems to be basically assembled, and only a few workers are doing the final finishing work.
Another one has just started to be assembled, the base of the machine tool has just been placed there, and the guide rails have not even been assembled.
This near-complete CNC broaching machine will be used in the exhibition in Beijing, and Cai Wenhao took a technical supervisor to personally check it.
"There is no need to install this, it will be assembled after arriving in the capital."
"The CNC bus does not need to be plugged in, so as not to disassemble it when loading and transporting."
Cai Wenhao directed it personally, and the workers were finishing the work exactly as he wanted.Because this CNC broaching machine needs to be 20 to [-] meters long and weighs more than [-] tons, considering the long-distance transportation, some things will be reassembled in the capital, and debugging will also be carried out there.
"Mr. Cai, this CNC broaching machine really went to Beijing to participate in the International Machine Tool Exhibition."
"Yes, that's right, we have received invitations to participate in the exhibition."
"Does that mean some foreigners will come to see our broaching bed?"
"This is the International Machine Tool Show, there must be many foreigners."
It was said that these workers were a little excited. These days, foreigners are a rarity. If a foreigner appeared in Fenghuang City, they would definitely be surrounded by crowds, because everyone had never seen it before and thought it was a novelty.
"There are really foreigners who come to visit our machine tools, so we must ensure the quality of assembly."
Cai Wenhao said, "Yes, we must pay attention to quality. When the time comes, let foreigners see whether our CNC broaching machines are advanced or not, and whether they are outstanding."
The company received the invitation letter, and the good news spread across thousands of miles, and gradually spread among the employees. Some people were excited about the discussion, and they seemed more and more excited.
"The official invitation letter has been received, and I am really happy for the company."
"I heard that there will be many foreigners coming to see our CNC broaching machines. How face-saving it is."
"It's still a category A booth, numbered A-16, our company is too good."
"."
Two days later, the CNC broaching machines exhibited began to be hoisted on a large flatbed trailer, bound firmly, covered tightly with tarpaulins, and began to leave the manufacturing site.
During the whole process, many workers were happily watching.
Lin Feng was also at the manufacturing site, watching the machine tools being loaded and transported away, he felt relieved. As for the workers watching the fun, let's just watch and make them happy.
The big trailer left slowly and drove out of the workshop. Suddenly, warm applause rang out, and it was unknown who took the lead in applauding, and then the workers applauded happily and vigorously.
They are happy!
The CNC broaching machine produced by ourselves will be on the international stage and will be displayed in front of foreigners. The pride in my heart and the kind of happiness from the bottom of my heart cannot be described with words.
The same was true for Lin Feng, who watched the large flatbed trailer leave the workshop and applauded vigorously with everyone.
A few days later, this broaching machine will be transported to the Convention and Exhibition Center in Beijing, where it will undergo final installation and commissioning.
"Boss, the CNC broaching machine we exhibited has started smoothly."
"Well, have the comrades sent to the capital been selected?"
"After the selection is made, first send a supervisor to take two technicians and four workers there, and I will go there too." He Huahui reported.
in the office.
Lin Feng was carefully reviewing the design drawings of the LH1500 model again. After carefully reading the design drawings, Lin Feng signed his name in the approval column, found the drawing number in the drawing number list, picked up the red pen and ticked it .
There are a total of more than 300 drawing numbers, all of which are relatively important. Lin Feng personally checks them. After the design drawings of these drawing numbers are drawn, they must be sent to Lin Feng for signature and approval.
After ticking a check with a red pen, Lin Feng looked at the list and thought in his heart that there are more than 300 drawing numbers in total, and almost half of them have already been ticked. Maybe in two or three months, all these drawing numbers will be completed. approve.
This speed was faster than Lin Feng had expected.
Why is it so fast?
Because there are general design drawings of each unit body drawn by Lin Feng himself, design drawings of some important and key parts, and usual guidance.
In addition, the number of designers in the design office has increased from more than 100 at the beginning to more than 200, and now there are more than 300.
The increasingly large team of designers is also one of the reasons for the faster and faster design speed.
Fortunately, there is Fenghuang factory to help process and manufacture some parts for design verification. Otherwise, my own factory building has not been built yet, and even the parts for design verification cannot be manufactured.
"Boss, your car is ready."
Standing outside the door was Ding Haixia, director of the Group Office.
In his thirties, with neat short hair, he graduated from a domestic university with a bachelor's degree. He worked in a joint venture in the coastal area before and was hired by a high salary.
She has served as the director of the group office for more than a month, and this more than a month has proved that she has good abilities and is completely worthy of this position.
Lin Feng put this list into a drawer, got up and said, "Then let's go, and take a look at our factory."
It's been a few days since I went to see the progress of the construction of the factory area, so Lin Feng is going to have a look today.
The distance is not very far. In about 10 minutes, the jeep arrived at the gate of the factory area. Compared with what I saw last time, there were new changes.
The huge factory gate is basically completed.
Modern and stylish!
The design of the factory gate fully refers to Lin Feng's opinion. The width reaches more than 30 meters, and there are security guard boxes on both sides of the factory gate.
The workers are finishing the final decoration on the factory gate, and the big gilt characters of "Leihuo Technology Industry Group" are very eye-catching.
There are two gates in this factory area, this is the main gate, and there is a back gate.
The main road of this national-level industrial park outside the main gate is straight and wide with eight lanes in both directions.
However, the main entrance is not closely adjacent to this avenue, but retreats 20 meters inward.
There is enough space on both sides of the gate to design and plan a large number of parking spaces. The length of the factory area is more than 1 kilometer and the width is more than 800 meters, which is enough to plan thousands of parking spaces.
"Boss, there are so many parking spaces, isn't there a little too much?"
Lin Feng said, "Not many. There will be at least several thousand employees in our factory area in the future. In the future, everyone will have a car. I think the 1000-odd parking spaces are still a bit small."
what!
Everyone has a car.
Several people following Lin Feng, including Ding Haixia, were slightly startled.
In the early 90s, owning a motorcycle was a great thing. Most people would not dare to think about buying a small car.
Noticing everyone's expressions, Lin Feng said, "Follow me well, and within ten or eight years, each of you will be able to afford a car."
"Really!"
"thank you boss!"
"If I also buy a small car, it will be a big face to drive back to my hometown."
"."
Seeing that everyone was a little excited, Lin Feng smiled slightly and said in his heart, when you enter the 21st century, you will find that buying a small car is actually nothing. After another 20 years, the roads will be full of cars, and traffic jams will become a norm .
Standing at the factory gate and looking at it with satisfaction, Lin Feng was wearing a hard hat and waved, "Come on, let's go in and take a look."
Entering from the factory gate is a wide vestibule area, and directly in front of it is the main road in the factory area, which has been paved with gravel and will be paved with asphalt in the future.
There is a building under construction on the left and right of the vestibule area, which are the technology research and development building and the office building respectively.
Both buildings are designed to be 28 stories high, and both will have beautiful and stylish glass facades.
With such a height and such a design, it is estimated that it will become the two tallest buildings in Phoenix City after completion, and it will also be a landmark building.
The construction height of the two buildings has exceeded ten floors, basically at the speed of building one floor in four or five days.
This speed is not too slow. After all, it was the early 90s, and the level of construction engineering equipment and construction technology could not be compared with that of later generations.
Continuing to walk along the main road in the factory area, several factories are under construction. They are the aero-engine assembly factory, No. [-] and No. [-] processing factories, raw materials and parts warehouses, etc.
Further on, there is an open and flat open space.
With an area of 1500 mu, that is, an area of one square kilometer, such a large area is enough to build a large factory area.
The construction of such a large factory area also means that a lot of money is needed.
Lin Feng was a little short of money, so he didn't dare to spread the stall too big.The technology research and development building and the office building must be built, so it can be done in one step, and the design height has reached 28 floors, and the exterior wall is designed with exterior glass that is only used in coastal areas.
The construction of the factory area has to be divided into two phases. The first phase of the project is currently under construction, with a total of three factories + one warehouse.
The aero-engine assembly plant is a standard rectangle, 160 meters long, 85 meters wide, and has a construction area of 13600 square meters. Such a large plant can be completed in one step. It is no problem to produce hundreds or even thousands of aero-engines a year. It can even be not just the LH1500 turboshaft engine, there may be other types of aero engines in the future.
In addition to the huge assembly plant with an area of 13600 square meters, there are also two mechanical processing plants.
The two factory buildings are also rectangular, with exactly the same area and size, 120 meters long and 70 meters wide, with a construction area of 8400 square meters.
The construction standards of these two factories are similar to those of the assembly factory, and they are also very high. The thickness of the concrete layer on the bare ground is more than 80 centimeters.
The concrete layer is nearly one meter thick, which is why it costs so much.
Because this is a precision manufacturing plant for aero-engine parts, the ground concrete requires such a thickness, mainly for shock absorption, without affecting the processing accuracy of parts.
Originally, each factory building should be equipped with a central air-conditioning system to maintain a constant temperature and humidity throughout the year. However, the central air-conditioning system for such a large factory building needs to be imported, and the price is relatively expensive. Lin Feng decided not to install it yet.
Each factory building has reserved a design for the installation of central air-conditioning, and it will be installed when there is money in the future.
There is also a central warehouse, which looks similar to a factory building, and its area is not small, reaching four to five thousand square meters.It is mainly used to store various raw materials, purchased parts, and processed and manufactured finished parts.
Lin Feng looked around the factory area for at least an hour. When he saw the empty land with an area of hundreds of acres, he thought in his heart, when he has money, he must build it as soon as possible.
After looking around the factory area, Lin Feng was still thinking about the construction of the factory area in his mind. In addition to thinking about its construction progress, he was also wondering if there were any areas that needed improvement.
After thinking about it, I felt that there was no problem, and the construction of the entire factory area was basically proceeding according to my original requirements.
The construction of the factory building is progressing well, and the procurement of equipment.
Most of the equipment is still domestic equipment, such as ordinary lathes, ordinary grinding machines, ordinary drilling machines and milling machines and so on.
Ordinary equipment with good quality has acceptable accuracy, and there is no problem with drying parts for aero-engines.
For example, domestic ordinary lathes, there is no problem in turning the outer circle and the inner hole with an accuracy of less than 5 wires.
The processing accuracy of ordinary grinding machines is often higher, and the accuracy of the outer circle produced by grinding can reach within 1 wire, or even reach a few thousandths without any problem.
All domestic ordinary equipment is definitely not enough. CNC equipment is also needed, and some high-precision, highly automated CNC equipment is also needed.
Lin Feng has already approved the list of purchasing CNC equipment, and the procurement department has also contacted the agent to prepare to import a batch of CNC equipment from abroad, including CNC machining centers, two five-axis linkage CNC machining centers, and one CNC outer circle Grinder etc.
As for the CNC broaching machine, it must be manufactured by itself, and it is enough to plan two CNC broaching machines and one ordinary broaching machine.
Lin Feng specially called the person in charge of the procurement department over, and after listening to his report, he was relieved that the equipment procurement was proceeding step by step.
After sending the person in charge of the purchasing department away, Lin Feng thought about his turboshaft engine again.
The design of the LH1500 turboshaft engine is progressing well, exceeding Lin Feng's expectations. It is estimated that in a few months, at most half a year, the production and manufacturing of various parts of the verification machine will begin.
From the beginning of the design, the manufacturing verification machine has been produced for more than a year.
This speed is exciting enough.
In the history of the development of aero-engines in the world, it is estimated that only during World War II had such a speed.
Because this is a systematically designed turboshaft engine, design verification is basically not required. Even if you go for design verification, the result is completely in line with the design requirements. So far, the design verification of every part is like this.
Design verification is the most time-consuming and costly financial and material resource, but the whole situation has changed in Leihuo Technology Industrial Group.
The production of each part of the verification machine will start in half a year at most, and it is estimated that small batch production will start in a year at most
After making such a calculation in his mind, Lin Feng himself was startled.
The whole process has been greatly advanced. It was originally thought that it would take at least two or three years to start small batch production, but now it has been shortened to about one year.
With such a speed, Lin Feng was both pleasantly surprised and a little worried.
If I really enter the small batch production of this turboshaft engine after a year, what about the manufactured engine?
What helicopter is it mounted on?
The most advanced domestic domestic helicopter is the "Dolphin" helicopter imported from France, which is now the Wuzhijiu.
Obviously, if the LH1500 turboshaft engine is installed on the Wuzhijiu, it must be inappropriate, a typical big bull pulling a small cart.
The power of a single LH1500 turboshaft engine reaches 1526 kilowatts, which is only a prototype, and the improved version in the future is estimated to have an output power of more than 1700 kilowatts, or even 1800 kilowatts.
No, no!
Lin Feng frowned slightly.
After thinking for a long time, Lin Feng thought in his heart, then he can only go to the military, tell them his progress, and then let the military quickly establish a new helicopter project, and use its own turboshaft engine as the power.
Then who to look for.
Soon, Lin Feng thought of a suitable candidate and was going to give it a try.
There are still two chapters today, and the first chapter will be released. Chapter 2 will be a little later, and it has not been finished yet.
(End of this chapter)